Labcyte Echo 525 - Labware; Electrical; Ratings; Physical

Labware
Source Labware Compatibility: 6RES (ER-0050), 384PP (P-05525), 384PP TC (PPT-05525), 384PP Plus (PL-05525) , 384LDVPlus
(LPL-0200)
Destination Labware Compatibility: All Echo qualified microplates and most ANSI-compliant/SBS-standard microplates in 96-well
and 384-well format that are 8-16 mm in height are compatible. Use of 1536-well plates as destination plates is application
dependent.
The table below shows the approximate fill time per plate transferred per 24 hour period, including robotic movement of
microplates in and out of the instrument.
Source Plate Type Destination Plate Type Dispense Type
Dispense Volume Per
Destination Well
Destination Plate Fill
Cycle Time (min)
Reservoir (6RES) 384 1:384 5 µL 9.3
Reservoir (6RES) 1536 1:1536 1 µL 17.2
384PP/384PP Plus 384 384:384 25 nL 2.2
384PP/384PP Plus 384 384:384 1 µL 3.3
384PP/384PP Plus 384 16:384 1 µL 3.7
384PP/384PP Plus 384 48:384 5 µL 10
384LDVPlus 384 384:384 100 nL 3.8
384PP Plus 1536 4x384:1536 25 nL 7.9
384PP Plus 1536 4x384:1536 1 µL 12.4
Table 16: System Throughput
Electrical
There are four electrical configurations of the Echo Liquid Handler:
Voltage Frequency Power Fuse
100-120 V 50 Hz 10 A 115 VAC, 10 A, FAST (P/N 001-3966)
100-120 V 60 Hz 10 A 115 VAC, 10 A, FAST (P/N 001-3966)
200–240 V 50 Hz 5 A 250 VAC, 5 A, FAST (P/N 001-3967)
200–240 V 60 Hz 5 A 250 VAC, 5 A, FAST (P/N 001-3967)
Table 17: Electrical Configurations for the Echo Liquid Handler
Note: The electrical requirements listed above do not account for chiller power requirements.
Ratings
l Noise Rating: 64dBA
l Power Rating: 600W without the chiller
l Heat Rating: 600W without the chiller
Physical
l Weight: 128 kg (283 lbs)
l Dimensions:
165 PN | 001-11665
USER GUIDE | Echo® 525 Liquid Handler User Guide Labware