Operating the AUTOMIZER
TM
HELPING-HAND 93
Loading and Packing
Once you have finished the start-of-the-day inspection and made sure that your AUTOMIZER
TM
HELPING-HAND is ready for a work day, you can drive to the loading area to start collecting refuse.
IMPORTANT: Ensure that all malfunctions or concerns are reported to your supervisor and/or maintenance
department.
IMPORTANT: Prior to commencing and subsequent to completing your collection route, the lifting arm or bucket
should be parked in the hopper. Also, see NOTE on page 14.
Planning your Route
It is important to plan your route in order to be efficient. Planning your route will shorten your
collection time and prevent from being caught in a traffic jam. Remember that the A
UTOMIZER
TM
HELPING-HAND was designed exclusively to pick up roller carts.
NOTE: If your vehicle is equipped with a lifting bucket, collecting refuse is exclusively done manually.
Prior to starting your route, consult with your supervisor for specific driving rules.
IMPORTANT: Remember to obey all speed restrictions and road regulations.
NOTE: All persons operating the AUTOMIZER
TM
HELPING-HAND must have the proper state/province
issued license to drive the chassis that the A
UTOMIZER
TM
HELPING-HAND body is mounted to,
which includes certification to operate vehicles equipped with air brakes.
To Next Page
Loading...
Need help?
General
