4
Operating the
A
UTOMIZER
TM
HELPING-HAND
The different methods, procedures and necessary
actions to operate the A
UTOMIZER
TM
HELPING-HAND
are presented in this section.
Before operating the A
UTOMIZER
TM
HELPING-HAND,
the operator must be completely familiar with all safety
procedures and the location, operation and functions
of all controls and indicators related to the operation of
the unit.
You must complete the daily inspection before starting
the vehicle. It is your responsibility to report any
malfunctions or concerns to your supervisor and
maintenance personnel.
Consult with your supervisor for specific rules of
driving the A
UTOMIZER
TM
HELPING-HAND.
Obey all speed restrictions and regulations.
Daily Inspection
Approaching the Vehicle
As you approach the vehicle, look for any object under
or against the vehicle and check the surroundings for
people, other vehicles, as well as ground and overhead
obstructions. Ensure that the truck is parked at the
most convenient place where you will have all the
clearance required to perform a complete start-of-the-
day inspection. While doing the daily inspection, look
for any structural damage, inspect tires and check the
hydraulic tank for air leaks.
Warning!
You must read and understand the
Operator’s Manual before operating the
vehicle and its equipment.
To Next Page
Loading...
Need help?
General
