EasyManuals Logo

laerdal SimNewB Directions For Use

laerdal SimNewB
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
15
ENGLISH
INTRODUCTION SETUP GUIDE
REMOTE
CONTROL PC UTILITIES
DETAIL
SPECIFICATIONS
TROUBLE-
SHOOTING
4. Breathing
Spontaneous breathing
The SimNewB™ manikin's breathing activity can be assessed
from visible chest movement, from vocal sounds (grunting, cry-
ing, etc) and from breath sounds audible with a stethoscope.
The manikin’s spontaneous breathing can be initiated or stop-
ped by the instructor. The breathing rate can be set to 0-100
breaths per minute, with 40 breaths per minute as the default
setting.
The vocal and breath sounds are listed in the Detail
Specifications section, page 36.
When connected to a CO
2
source, the SimNewB manikin can
expire CO
2
. This function can be turned on and off from the
Remote Control or the PC Software.
Central cyanosis
To simulate central cyanosis, activate the SimNewB manikin
cyanosis function, which changes the color of the face surroun-
ding the lips to blue.
The brightness can be controlled from the Remote Control.
Assisted breathing
The SimNewB manikin is designed for airway devices such as
face masks, ET tubes (size ID 3.5mm recommended) and LMAs
(size 1 recommended).
The manikin is suitable for use with self-inflating bags and flow-
inflating bags. It is not designed for use with automatic ventila-
tors.
CLINICAL
SIMULATION
SimNewB.qxp:SimNewB DFU EN 3/25/08 4:23 PM Page 15

Other manuals for laerdal SimNewB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the laerdal SimNewB and is the answer not in the manual?

laerdal SimNewB Specifications

General IconGeneral
Brandlaerdal
ModelSimNewB
CategoryMedical Equipment
LanguageEnglish

Related product manuals