FLAPS_V6_HBR_datasheet_manual_EN.odt
Table of contents
1 Important notes and warnings.......................................................................5
2 Product description.........................................................................................6
2.1 Product use......................................................................................................6
2.2 Main product functionalities...............................................................................6
2.3 Inputs..............................................................................................................6
2.4 Controls............................................................................................................7
2.5 Outputs............................................................................................................7
2.6 Indication.........................................................................................................7
2.7 Protections........................................................................................................7
2.8 Description of the control panel..........................................................................8
2.8.1 Control panel HBR (4 control positions)........................................................8
2.8.2 Control panel HBR 3P (3 control positions)...................................................9
2.8.3 Differences between HBR and HBR 3P variants and how to read this manual
when using the HBR 3P variant............................................................................10
3 Specifications...............................................................................................11
3.1 Electrical characteristics...................................................................................11
3.2 Mechanical specifications.................................................................................11
3.3 Allowed operating conditions............................................................................12
3.4 Lifetime and warranty......................................................................................12
3.5 Tests according to DO-160G.............................................................................13
4 Installation in an airplane............................................................................14
4.1 Mechanical installation.....................................................................................14
4.2 Position sensor mounting.................................................................................15
4.3 Actuator installation.........................................................................................16
4.4 Electrical connections.......................................................................................17
4.4.1 Electrical connections of actuator with internal position sensor and limit
switches.............................................................................................................18
4.4.2 Electrical connections with simple actuator, external position sensor and limit
switches.............................................................................................................19
4.4.3 Electrical connections for dimming control unit display elements..................20
5 Description of functions................................................................................21
5.1 Normal mode – automatic................................................................................21
5.2 Errors and faults..............................................................................................22
5.3 Safety mode – manual.....................................................................................23
5.4 Device setup mode..........................................................................................24
5.5 Position programming mode.............................................................................26
5.6 Landing gear control output.............................................................................28
5.7 Dimming of indicator elements.........................................................................28
6 Errors and faults, troubleshooting................................................................29
6.1 Indicated errors and faults...............................................................................29
6.2 Troubleshooting..............................................................................................32
3/33
To Next Page
Loading...