FLAPS_V6_HBR_datasheet_manual_EN.odt
2 Product description
2.1 Product use
Product FLAPS V6 is designed for electric control of flaps of UL aircraft. It is usually
supplied as a set: electronic control unit + servo motor (in case of motor without internal
sensor: + position sensor + 2x protective limit switch).
THIS PRODUCT IS NOT APPROVED FOR INSTALLING IN CERTIFIED
AIRPLANES.
2.2 Main product functionalities
Basic list of main product functionalities:
• Automatic movement of the motor (flaps) to predefined positions
• user adjustable positions
• user-adjustable LBUS pin function (one of the following)
◦ landing gear control output
◦ input for dimming the display elements of the device
• Possibility to use Honeywell RTY series sensor as a position sensor (automatically
detected by the device)
• Intelligent fault detection of position sensor, motor, undervoltage, high temperature
and more
• indication of operating and fault states
2.3 Inputs
The flaps control unit has the following inputs:
• power supply inputs (dashboard electricity from the airplane)
• input for position sensor connection
• 2 inputs for optional limit switches
• dimmer signal input (shared with landing gear output control function)
6/33
To Next Page
Loading...