Lantronix EDS4100 User Manual

4: Configuration Using the Web Manager
EDS4100 4 Port Device Server User Guide 103
Table 4-30. Protocol Stack Page
Protocol Stack Page
Settings
Description
TCP
Send RSTs RST is a TCP control bit that informs the receiving TCP stack to
immediately end a connection. However, sending this bit may
pose a security risk. Select whether you want the RST control bit
sent to end a connection immediately. Choices are:
On = the RST bit is sent. (default)
Off = the RST bit is not sent.
After selecting an option, click Submit.
ICMP Internet Control Message Protocol (ICMP)can be used as an
error-reporting protocol between two hosts. This setting specifies
whether incoming and outgoing ICMP messages are processed.
Choices are:
On = ICMP messages are processed. (default)
Off = ICMP messages are not processed.
After selecting an option, click Submit.
ARP Enter the maximum number of milliseconds that a MAC address
will remain in cache before being removed. Default is
00:01:00.000. After selecting an option, click Submit.
ARP Cache
IP Address Enter the IP address of the entry to be added to the Address
Resolution Protocol (ARP) cache.
MAC Address Enter the MAC address of the entry to be added to the ARP
cache. After entering an IP address and a MAC address, click
Submit.

Lantronix EDS4100 Specifications

General

Brand	Lantronix
Model	EDS4100
Category	Server
Language	English