4: Configuration Using the Web Manager
EDS4100 4 Port Device Server User Guide 51
Tunnel – Accept Mode Page
Accept Mode determines how the EDS4100 “listens” for an incoming connection. If you
click Accept Mode at the top of one of the Tunnel pages, the Tunnel – Accept Mode
page appears. This page lets you select the method for starting a tunnel in Accept mode
and select other settings for the tunnel selected at the top of the page.
Under Current Configuration, Local Port has a Delete link that lets you delete the local
port number shown. If you click this link, a message tells you that your action may stop
an active connection. Click OK to proceed or Cancel to cancel the operation.
For more information about Accept mode, see Accept Mode on page 124.
Figure 4-15. Tunnel – Accept Mode Page
To Next Page
Loading...
