Lantronix EDS4100

4: Configuration Using the Web Manager
EDS4100 4 Port Device Server User Guide 67
Table 4-14. SNMP Page
SNMP Page Settings Description
SNMP Agent Select whether SNMP is enabled. Choices are:
On = SNMP is enabled. (default)
Off = SNMP is disabled.
Read Community Enter the case-sensitive community name from which the
EDS4100 will receive trap messages. Default is public. For
security, the read community name appears as <Configured>
to show that one is enabled.
Write Community Enter the case-sensitive community name to which the
EDS4100 will send trap messages. Default is private. For
security, the write community name appears as <Configured>
to show that one is enabled.
System Contact Enter the name of the system contact. Default is <None>.
System Name
Enter the EDS4100’s physical location. Default is
EDS4100 .
System Description Enter a system description for the EDS4100. Default is
Lantronix EDS4100.
System Location Enter the geographic location of the EDS4100. Default is
<None>.
Enable Traps Select whether SNMP cold start trap messages are enabled
at boot. Choices are:
On = SNMP cold start trap messages are enabled at boot
time. (default)
Off = SNMP traps are disabled.
Primary TrapDest IP Enter the primary SNMP trap host. Default is <None>.
Secondary TrapDest IP Enter the secondary SNMP trap host. Default is <None>.