Lantronix EDS4100

4: Configuration Using the Web Manager
EDS4100 4 Port Device Server User Guide 56
Tunnel – Connect
Mode Page
Settings
Description
Block Serial Data Select whether incoming block serial data should be discarded. This
setting is used for debugging purposes. Choices are:
On = discard all incoming serial data on the respective interface.
Off = do not discard all incoming serial data. (default)
Block Network Data Select whether incoming block network data should be discarded.
This setting is used for debugging purposes. Choices are:
On = discard all incoming network data on the respective interface.
Off = do not discard all incoming network data. (default)
TCP Keep Alive Specifies the number of milliseconds the EDS4100 waits during an
inactive connection before checking the status of the connection. If
the EDS4100 does not receive a response from the remote host, it
drops that connection.