Laser Mech FiberMINI 2.0 - Camera Specifications

PLMNL0243 REV. A, Effective Date: 03/24/16 35 FiberMINI ™ 2.0 Operation Manual
See Figure 49 for the offset style
camera mount.
Figure 49
5.8.2 Camera Specifications
Laser Mechanisms camera
PLCAM0002 (see Figure 50) is
available as an option. It meets the
specifications in the table below. If
you supply a camera, it must also
meet these specifications.
Specification
Requirement
Pick-up Element
1/2” Interline Transfer CCD
Image Sensor
Pixels
795 (H) x 596 (V)
Effective Pixels
752 (H) x 582 (V)
Unit Cell Size
6.50µm (H) x 6.25µm (V)
Shutter Speed
EI: 150 sec – 1/100,000 sec
FL: 1/120 sec
FL: 1/50 sec
Minimum
Illumination
0.0005 l x F1.4 (AGC HI)
Internal Synchronization System
Video Output
1Vp-p, 75 ohms,
unbalanced
Resolution (H)
570TVL (Center)
S/N Ratio
46dB (AGC OFF)
AGC
HI: 5-50dB, LO: 5-32dB
Back Light
Compensation
ON (Center + Lower)
Gamma Correction
0.45
Power Supply
DC 12V ± 10%
Current
160mA
Thread
C Mount (1”-32)
Figure 50