Launch X-431 - Page 19

About X-431 Station
Diagnostics
Toolbox & Apps
FAQ
Initial Use
14
www.x431.com +86 755 8455 7891
LAUNCH Station
User's Guide
6 HOME Press to the home (Job menu) screen.
7
/ Move cursor up and down for selection.
/
Move cursor left or right for selection; Or turn page up and down
when more than one page is displayed.
8 OBD-16 connector
To connect to vehicle's DLC (Data Link Connector) via diagnostic
cable.
9 5V Charging port To connect to external DC power for charging Pilot TPMS.
10
Power
• In Off mode, press it for about 5 seconds to turn the handset
on.
• In On mode:
• Press it to activate the LCD if the LCD is off.
• Press it to turn off the LCD if the LCD lights up.
• Press it for 3 seconds to turn it off.
11 OK Conrms a selection (or action) from a menu list.
12
Screenshots
Press it once to capture the current screen. All screenshots are
saved in the “Image” folder of “Data”.
13
Diagnostic Reports
A quick dial to the “Diagnostic Reports” module. Alternatively, it
can also be accessed by “Data” -> “Diagnostic Report”.
14
Help Provides detailed descriptions/tips for diagnostics.
15 Charging LED Red means Charging and Blue means Fully charged.
Pilot TPMS has the following functions and advantages:
• TPMS: Pilot TPMS provides the ability to activate most OEM/Universal TPMS sensors, and allows users
to reprogram sensor IDs, retrieve/clear TPMS DTCs and sensor relearning, helping technicians quickly
nd out faulty TPMS and turn off MILs.
• Smart(Auto-Detect) Diagnosis: Once Pilot TPMS and the vehicle are properly connected, user can
manually start system auto-detect process. Once the whole process is successfully nished, a diagnostic
report will be automatically generated and sent to your email box (if bound).
• Manual Diagnosis: If Auto-Detect failure occurs, manual diagnosis is also available. Diagnosis functions
include: Version Information, Read DTCs, Clear DTCs and Read Data Stream (supports 3 display modes:
Value, Graph and Merged).
• OBDII/EOBD Diagnosis: 10 modes of OBD II test are supported, including EVAP, O2 Sensor, I/M
Readiness, MIL Status, VIN Info, and On-board monitors testing etc.
• Reset: Frequently used maintenance and reset items including Oil lamp reset, DPF regeneration,
Electronic parking brake reset, Steering angle calibration, Battery maintenance system reset, ABS
bleeding and TPMS reset can be done.
• One-click Update: Let you update your diagnostic software and APK online.
• Features screenshot. Screenshots and reports sharing are supported.
• Touch & Keypad input are supported. Quick Dial buttons enables you to easily access the corresponding
functions.
Note: For initial use, the test report generated by Pilot TPMS cannot be directly pushed to the mobile diagnostic
center. The user needs to bind the Pilot TPMS device to the X-431 Station user account first. Only after it is
successfully bound, the test report can be synchronized to the mobile diagnostic center and reminded. For specific
binding operations, please refer to Chapter "User Info".