Version 3.3 99
Position Operator’s Manual
coordinate information from the receiver. In addition to the coordi-
nates and datum in use, this screen displays the current course and
speed over ground. There are no edit functions available in this
screen, unless you are in Demonstration mode. Refer to Appedix E -
Demonstration Mode for a full description of this feature.
Loran-C
The POS1 screen expands to accommodate up to four (4) TD’s in
areas where a fourth TD might be available.
User Grid
User defined Grids are now available as an option in some receiver
models. You can set the receiver up to provide Easting and North-
ing position data based on a local grid. The grid function is set up in
the CFG1 Position screen.
To Next Page
Loading...
