Version 3.3 187
Appendix D - Dual Control Head Mode Operator’s Manual
Table D-1. Master / Slave Common Data Base
Data Base Comments
Present Position Update once per second
Time Update once per second. Displayed in the
same mode on both units.
Date
Routes Only one unit can make changes at any given
time.
Waypoints Only one unit can make changes at any given
time.
Reset XTE Only one unit can make changes at any given
time.
DGPS Setup Only one unit can make changes at any given
time.
Dual Control Alarms
Man Over Board Only one unit can make changes at any given
time.
The items detailed in Table D-2 are independently controlled at the
individual receiver control heads.
Table D-2. Independently Controlled Functions
Plotter Setup Navigate Displays
GPS Engineering Display Position Displays
Dual Control Setup Auxiliary Displays
Lighting Setup Tide Displays
DGPS Displays (slave reflects GPS Displays (slave reflects the
the conditions in master) conditions in master)
NMEA Out Printer Out 2
Waypoint Sorting
To Next Page
Loading...
