Leica MX400 - Page 66

Version 3.3 53
Waypoint Operator’s Manual
3 Make New WPT
4a Use WGS-84 Datum
Select Lat/Lon (W84)
4b Use Datum Other
Than WGS-84
Select Lat/Lon Datum
4c Create a new WPT Based
on a Range & Bearing
from an existing WPT
Select Range Bearing
Select desired datum
from displayed list.
Press Select.
Enter desired range
and bearing.
Press the cursor
down arrow.
5 Enter Coordinates
Press the cursor
down arrow.
6 Modify WPT Number
(Optional)
Press the cursor
down arrow.
7 Modify WPT Text
& Symbol (Optional)
Press the Done softkey.
4a.Make New WPT - Select Lat/Lon (W84), Lat/Lon Datum, or
Range Bearing.