5.4002.8501.0 B
Test and Adjustment 7-3
The standard value is 200 mSec.
5. Push
to confirm and go one level up.
7.3 Tests
7.3.1 Analyse the Reliability of a Route
1. Start the Lely Control Application (see page 5-5).
2. Stop the time path to take the machine out of operation (see Start or Stop the Time Path on page 5-
33).
3. In the main menu of the Lely Control app, select Routes and push
.
To Analyse the Reliability per Route
1. Select Route analysis and push
.
2. Select Fail. problty and push
.
Push or to display routes that are not displayed.
3. If a route has a failure probability of more than 2 (see Failure Probability per Route on page 4-19):
1. Make a note of the route number.
4. Push
to confirm and go one level up.
Because a route can not be modified, you have to delete an unreliable route and to make
a new one. Before doing so it is good to figure out what is wrong.
To Analyse the Cause of an Unreliable Route
1. Select Failure analys and push
.
in n o vato rs in ag ricu ltu r e
To Next Page
Loading...