LELY DISCOVERY 90 S - Follow a Wall or Fence on a Certain Distance (Ultrasound)

5.4002.8501.0 B
5-26 Operating Instructions
7. If you want to drive back before making a turn:
1. Push soft button
> to select Back.
2. Push
or to select the reverse distance.
8. If you want to modify the radius of a turn:
1. Push soft button
> to select Radius.
2. Push
or to select the radius.
9. Push
to start.
If the made turn is not exactly as planned, modify the position (see the next step). This is
above all important if the angle is 90 or 180 degrees left or right.
10. Push soft button
MAN to modify the position.
1. Push soft button
to turn left, or to turn right.
2. Push
to confirm and go one level up.
11. Push soft button
Save.
5.11.1.4 Follow a Wall or Fence on a Certain Distance (Ultrasound)
Do not program Ultrasound L when the wall is more than 2 meters away.
1. Select the menu Ultrasound L and push
.
2. Read the actual distance to the wall (UltraDst) from the display.
3. Push
or to select the required distance to the wall
4. Push
to start.
5. If the machine approaches a bump point (approx. 30 cm (12 in)), push
to smoothly reduce speed.
6. Push
to stop the machine immediately.
in n o vato rs in ag ricu ltu r e