LELY DISCOVERY 90 S - Set a Time Path

5.4002.8501.0 B
5-30 Operating Instructions
3. In the main menu of the Lely Control app, select Work and push .
4. Push
to select the menu MANUAL ROUTE.
Set a Series of Routes
1. In the menu MANUAL ROUTE, push
to select the series of routes you want to set (A, B, C or D).
2. Push soft button
> to select the first route in the series.
3. Push
or to select the route number.
4. Repeat step 2 and 3 to select the next route in the series (if applicable).
5. Push soft button
> twice.
6. Push Save to save the series of manual routes.
Delete a Manual Route
1. Push
or to select the route you want to delete.
2. Push soft button
Reset.
5.11.7 Set a Time Path
The machine must not drive more than 40% of the total time in a time path. It must
spend minimum 60% of the total time charging at the charging station.
To quickly confirm a change while editing a route, push button . To cancel push
button
.
1. Open the Lely Control app on the smartphone (see Start the Lely Control Application on page 5-5).
2. Stop the time path to take the machine out of operation (see Start or Stop the Time Path on page 5-
33).
3. In the main menu of the Lely Control app, select Routes and push
.
4. Select Time path and push
.
• Refer to the time path description (see Time Path on page 4-18).
5. Push soft button
New.
in n o vato rs in ag ricu ltu r e