EasyManua.ls Logo

LEMKEN Diamant 11 - Procedure

LEMKEN Diamant 11
137 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Attaching the implement
47
8 ATTACHING THE IMPLEMENT
8.1 General
DANGER
Risk of fatal injury due to unsecured connection between
lower link and cross shaft
If the connection between the lower link and cross shaft is not se-
cured, the pivot on the cross shaft may slip out of place.
This may cause death or injury to other road users while the im-
plement is being transported.
The connection between the lower link and the cross shaft must
always be secured.
Do not stand close to the implement when it is raised.
DANGER
Risk of injury due to unsecured top link pin
If the top link pin is not secured, it may slip out or go astray.
As a result:
• The implement may drop to the ground or be damaged,
• People in the immediate vicinity may be injured.
The top link pin must always be secured.
Do not stand close to the implement when it is raised.

Table of Contents