Operation
69
11.3 Turning on the headland
Risk of damage to components
If an implement is not raised all the way, there is a risk of damage
to components if the tractor is not turned correctly at the headland.
Before turning at the headland, the implement must be raised all the way before
cornering in order to prevent damage to the implement.
The tractor may only be turned at the headland at a speed appropriate to the con-
ditions of the soil and the terrain.
Before turning at the headland:
− Lift the implement right over the three-
point linkage at the front and right over
the chassis at the rear.
After turning at the headland:
− When driving straight at an appropriate
speed, lower the implement to the preset
working depth.
To Next Page
Loading...
