Adjustments
71
CAUTION
− Read and follow the section entitled "Safety and protection
measures.
• The
implement may only be used, maintained and repaired by
people who are familiar with it and who are aware of the haz-
ards involved.
•
All adjustments and repair work, as well as the rectification of
any malfunctions, is to be c
onducted when the drive has been
switched off and the engine is at a standstill only.
ignition key.
DANGER
Risk of accidents while making adjustments
During all adjustment work, there is a risk of crushing, cutting,
jamming and impacts to the hands, feet and body on heavy and -
in part - spring-loaded and/or sharp-edge parts.
Adjustment work may be carried out by appropriately instructed
personnel only.
− Always wear appropriate protective clothing.
− Always observe the currently valid operational safety and acci-
dent prevention regulations.
To Next Page