Lenze 9300 vector - Page 332

Configuration
Code table
8
8.5

8.5−43
EDSVF9383V EN 4.0−03/2006
IMPORTANTPossible settingsCode
SelectionLenzeNameNo.
C0710 Function 0
Function selection, function
block TRANS1
See System
Manual
(extension)
0 Rising trans Rising edge 1. LOW−HIGH edge at
TRANS1−IN switches
TRANS1−OUT = HIGH
2. After the time has elapsed
(C0711),
TRANS1−OUT switches
to LOW
1 Falling trans Falling edge 1. HIGH−LOW edge at
TRANS1−IN switches
TRANS1−OUT = HIGH
2. After the time has elapsed
(C0711),
TRANS1−OUT switches
to LOW
2 Both trans Both edges 1. LOW−HIGH− or HIGH−LOW
edge at TRANS1−IN switches
TRANS1−OUT = HIGH
2. After the time has elapsed
(C0711),
TRANS1−OUT switches
to LOW
C0711 Pulse T 0.001 0.001 {0.001 s} 60.000 Pulse duration, function block
TRANS1
l After the time has elapsed,
TRANS1−OUT switches
to LOW
C0713

CFG: IN 1000 FIXED0  Selection list 2 Configuration of digital input
signal, function block TRANS1
C0714 DIS: IN 0 1 Function block TRANS1
l Display of the signal linked in
C0713
efesotomasyon.com - Lenze