Single−axis controllers
Wiring
Devices in the range 145 ... 245 A (75 ... 130 kW)
3
131
EDS94SPP101 EN 10.2
DC bus and external brake resistor
Terminal X104 Labelling Description
A
B
C
C
D
C C
D
M10M8
−UG
+UG/Rb1
Rb2
Connection for DC−bus voltage and external brake resistor
: Terminal (scope of supply); conductor connection with wire end
ferrule
: M8 threaded bolt (GG81)/M10 (GG82)
: Ring cable lug (not in the scope of supply)
: Sleeve (scope of supply)
Wiring:
Standard: With terminal and wire end ferrule
Variant 1: Single assignment(First, removal terminal )
GG81: With M8 ring cable lug and sleeve
GG82: With M10 ring cable lug (Sleeve not necessary)
Variant 2: Double assignment(First, remove terminal )
With two M10 ring cable lugs and sleeve
SSP94KLB
Terminal data
Max. conductor cross−section Tightening torque
[mm
2
] [AWG] [Nm] [lb−in]
Terminal 120 250 mcm 42 375 Inbus 8
Threaded bolt − − 42 375 SW13
To Next Page
Loading...
