Single−axis controllers
Wiring
Device 292 A (150 kW)
3
139
EDS94SPP101 EN 10.2
The motor brake control modules differ in the following features:
ƒ Rated voltage
ƒ Device size assignment
ƒ Mounting type
The table shows the module/controller assignments according to the features listed.
Single−axis controllers Rated voltage of motor holding brake (control module)
Type 24 V 205 V 180 V
E94BSxE1454
...
E94BSxE4604
GG81
...
GG91
E94AZHY0101
E94AZHB0101
E94AZHN0025
E94AZHY0025
E94AZHN0026
E94AZHY0026
Tab. 3−4 Motor holding brake/control module assignment
GGx Device size
integrated in the installation backplane, already used or retrofittable
integrated in the device, already applied or retrofittable
(recommended variant for the same rated voltage)
integrated control module (automatic brake operation can be activated)
external control (via digital output/digital input)
external mounting (DIN rail or mounting plate)
click
A
B
Mounting of motor brake control module
1. Insert motor brake control module with both clips
into the openings of the basic device and press
downwards until the two detents engage audibly.
2. Check that the motor brake control module is
securely connected.
E94AZH123
To Next Page
Loading...
