Multi−axis controllers
Wiring
Devices in the range 2 ... 32 A (0.37 ... 15 kW)
4
210
EDS94SPP101 EN 10.2
Motor
Terminal X105
(right part)
Labelling Description
U
V
W
Connection of the motor phases
Functional earth
Connect the shields of the motor phases and of the optional motor
brake control separately and with a surface as large as possible to
the shield sheet. Use EMC wire clamp or EMC shield clamp for
fixing.
Connection for the PE conductor on the motor side with M5 ring
cable lug
SSP940X105
Terminal data
Max. conductor cross−section Tightening torque
[mm
2
] [AWG] [Nm] [lb−in]
Device sizes 1 + 2:
flexible
with wire end ferrule
2.5
12 0.5 ... 0.6 4.5 ... 5.3 PZ0
Device size 3:
flexible
with/without wire end
ferrule
10/16 6 1.2 ... 1.5 10.6 ... 13.3 PH1
To Next Page
Loading...
