Multi−axis controllers
Wiring
Devices in the range 2 ... 32 A (0.37 ... 15 kW)
4
211
EDS94SPP101 EN 10.2
10
23
a
b
c
d
e
M5
U
V
W
BD1/T1
BD2/T2
PE
SSP94MOTL1
Fig. 4−16 Stripping lengths of the motor cable
Dimensions [mm]
Type a b c d e
Device size 1 80 8 25 150 8
Device size 2 90 8 30 160 8
Device size 3 100 10 30 170 8
How to proceed:
1. Strip the motor cable according to dimensions given.
2. Fold back the shield of the motor cable over the cable sheath.
3. Stabilise the shield with self−adhesive conductive foil (recommendation).
4. Fix the shield and conductive foil with heat−shrinkable tube on the cable sheath.
5. Fasten cable lugs or wire end ferrules.
6. Connect the shields separately to the shield sheet using shield clamps (no strain
relief).
To Next Page
Loading...
