Accessories (overview)
Motor holding brake control modules
Motor holding brake control module E94AZHN0026
8
497
EDS94SPP101 EN 10.2
Standards
Conformity and approval
Conformity
CE
2014/35/EU Low−Voltage Directive
CE 2014/30/EU EMC Directive
EAC TP TC 004/2011
(TR CU 004/2011)
On safety of low voltage
equipment
Eurasian Conformity
TR CU: Technical Regulation of
Customs Union
EAC TP TC 020/2011
(TR CU 020/2011)
Electromagnetic
compatibility of technical
means
Eurasian Conformity
TR CU: Technical Regulation of
Customs Union
Approval
C
UR
US
UL61800−5−1 Power Conversion Equipment
(File No. E132659) for USA
CSA C22.2 No. 274−13 Power Conversion Equipment
(File No. E132659) for Canada
General electrical data
EMC
Noise emission EN 61800−3 Conducted, category C2.
Noise immunity EN 61800−3
Burst on mains cable: 2 kV/5 kHz
Burst on control cable: 2 kV/5 kHz
Surge on mains cable:
1 kV (1.2 s/50 s;
phase − phase)
2 kV (1.2 s/50 s; phase − PE)
Mounting conditions
Mounting place In the control cabinet
Mounting position Vertically
Mounting clearances
Above/below 25 mm
To the sides Side−by−side mounting without clearance
To Next Page
Loading...
