Accessories (overview)
Filters
Mains filters for power supply modules E94AZMPxxxx (8 ... 29 A)
8
549
EDS94SPP101 EN 10.2
Standard device
Cable X302 Labelling Description
1
2
3
Filter output conductor (lead with wire end ferrule, colour BK)
PE Output−side PE conductor (lead with M5 fork−type cable lug, colour
GN/YE)
SSP94FF007
Thermal contact
Terminal T1/T2 Labelling Description
T1
T2
Thermal contact connection
SSP94NF108
Terminal data
Max. conductor cross−section Tightening torque
[mm
2
] [AWG] [Nm] [lb−in]
E94AZMP0084
4
10 0.6 ... 0.8 5.3 ... 7.1 PZ1
E94AZMP0294
Safety instructions for the installation according to UL/CSA
Original − English
Warnings!
Conditions of Acceptability:
ƒ The products covered by this report are only intended for use with Power
Conversion Equipment (inverters).
ƒ Consideration shall be given to the field wiring leads. No strain relief test
was performed on the leads.
ƒ The devices in this report are only evaluated for factory wiring use.
ƒ Temperature tests were performed with hook mounted drive.
To Next Page
Loading...
