Accessories (overview)
Filters
RFI filters for single−axis controllers E94AZRSxxxx (54 ... 95 A)
8
577
EDS94SPP101 EN 10.2
Mechanical installation
Note!
The filter can be mounted in two ways. From this result different mounting
dimensions.
ƒ Standard mounting: The filter is mounted underneath the standard device.
ƒ Side−by−side mounting: In case of a low depth of the control cabinet, the
filter is rotated by 90° and mounted to the left side of the standard device.
For information on this topic, please see the corresponding mounting instructions.
Electrical installation
L1
1 (BK)
2 (BK)
3 (BK)
PE (GN/YE)
L1L2 L2
L3 L3
+
+
L3
N
PE
L1
L2
F1...F3
X301 X100
X302
E94AZxSxxxx E94ASxExxxxx
K1
SSP94FF610
Mains
Terminal X301 Labelling Description
L1
L2
L3
Connection of the mains phases L1, L2, L3
Connection for the supply−side PE conductor with ring cable lug M8
SSP94FF606
Terminal data
Max. conductor cross−section Tightening torque
[mm
2
] [AWG] [Nm] [lb−in]
E94AZxS0544 50 0
10 88.5
Hexagon
socket 5
E94AZxS0954 95 000
14 124.0
PE connection data
Æ Starting torque
[mm] [Nm] [lb−in]
E94AZxS0544
M8
12 106 SW 13
E94AZxS0954
To Next Page
Loading...
