Accessories (overview)
Filters
RFI filters for single−axis controllers E94AZRSxxxx (54 ... 95 A)
8
578
EDS94SPP101 EN 10.2
Standard device
Cable X302 Labelling Description
1
2
3
Filter output conductor (lead with wire end ferrules, colour BK)
PE Output−side PE conductor (lead with wire end ferrule, colour GN/YE)
SSP94FF607
Safety instructions for the installation according to UL/CSA
Original − English
Warnings!
Conditions of Acceptability:
ƒ The products covered by this report are only intended for use with Power
Conversion Equipment (inverters).
ƒ Consideration shall be given to the field wiring leads. No strain relief test
was performed on the leads.
ƒ The devices in this report are only evaluated for factory wiring use.
ƒ Temperature tests were performed with hook mounted drive.
Warnings!
Conditions of Acceptability:
ƒ The products covered by this report are only intended for use with Power
Conversion Equipment (inverters).
ƒ Consideration shall be given to the field wiring leads. No strain relief test
was performed on the leads.
ƒ The devices in this report are only evaluated for factory wiring use.
ƒ Temperature tests were performed with hook mounted drive.
ƒ Reactor model E94AZR0544 shall be installed with input wiring of 4 AWG
minimum. Reactor model E94AZR0954 shall be installed with input wiring
of 1/0 AWG minimum.
To Next Page
Loading...
