Lenze L-force 9400

Accessories (overview)
General accessories
Shield mounting
8

618
EDS94SPP101 EN 10.2
Shield mounting and cable cross−section
Shield mountings contained in the scope of supply of the Servo Drives 9400:
Type EMC clip (fixing clip) EMC wire clamp
Axis module Installation
backplane
EZA...
(axis module/installation
backplane)
(usability depends on
installation backplane)
E94ASxE0024
E94ASxE0034
E94AZPS0034
GG1 2/3 −
E94AMxE0024
E94AMxE0034
E94AMxE0044
E94AZPM0044
E94ASxE0044
E94ASxE0074
E94AZPS0074
GG2 2/2 1 x EZAMBHXM003
E94AMxE0074
E94AMxE0094
E94AZPM0094
E94ASxE0134
E94ASxE0174
E94ASxE0244
E94AZPS0244
GG3 2/2 1 x EZAMBHXM004
E94AMxE0134
E94AMxE0174
E94AMxE0244
E94AZPM0244
E94AMxE0324
E94AZPM0324
E94ASxE0324
E94ASxE0474
E94ASxE0594
− GG6 3/0
1 x EZAMBHXM003
1 x EZAMBHXM004
E94AMHE0474
E94AMHE0594
E94ASxE0864
E94ASxE1044
− GG7 3/0
1 x EZAMBHXM004
1 x EZAMBHXM005
E94ASxE0864
E94ASxE1044
− GG7 3/0
1 x EZAMBHXM004
1 x EZAMBHXM005
E94BSxE1454 − GG81 2/0 −
E94BSxE1724
E94BSxE2024
E94BSxB2454
− GG82 2/0
2 x wire clamps, large
(type of C−rail)
E94BSxE2924
− GG83 2/0
E94BSxB3664
E94BSxE4604
− GG91 2/0
Tab. 8−3 Shield mountings contained in the scope of supply
Shield mountings available as accessories:
Type EMC clip EMC wire clamp Cable tie
Accessory set EZAMBHXM0
07
(fixing clip)
EZAMBHXM0
06
(C02)
EZAMBHXM0
03
(C03)
EZAMBHXM0
04
(C04)
EZAMBHXM0
05
(C05)
EZAMBKBM
(metallic)
EZAMBHXM007 20 − − − − −
EZAMBHXM006 − 10 − − − −
EZAMBHXM003 − − 10 − − −
EZAMBHXM004 − − − 10 − −
EZAMBHXM005 − − − − 10 −
EZAMBKBM − − − − − 50
Tab. 8−4 Shield mountings in the accessories − Assignment and VPE