Lenze PROFINET 9400 - Page 42

6 Commissioning
6.4 Setting the IP configuration
42
Lenze · E94AYCER communication module (PROFINET®) · Communication Manual · DMS 11.0 EN · 04/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Gateway address
The gateway address is valid if the network address of the IP address and the gateway address are
identical.
If the gateway address and the IP address are identical, gateway functionality is not used.
DHCP is not supported.
The gateway address is set/changed in C13002
/ C14002.
In C13012/1...4
/ C14012/1...4, the currently used gateway address is shown.
Example: Display of the gateway address 192.168.0.1
Code C13012/1
C14012/1
C13012/2
C14012/2
C13012/3
C14012/3
C13012/4
C14012/4
Value 192 168 0 1