LevelOne WAP-6012 - Page 29

Access Point Setup
25
Security Settings - WPA2-PSK
This is a further development of WPA-PSK, and offers even greater security, using the
AES (Advanced Encryption Standard) method of encryption.
Figure 15: WPA2-PSK Wireless Security Screen
Data - WPA2-PSK Screen
WPA2-PSK
Network Key
Enter the key value. Data is encrypted using a 256Bit key
derived from this key. Other Wireless Stations must use the
same key.
WPA Encryption
The encryption method is AES. Wireless Stations must also
use AES.
Group Key Update
This refers to the key used for broadcast transmissions.
Enable this if you want the keys to be updated regularly.
Key Lifetime
This field determines how often the Group key is dynamical-
ly updated. Enter the desired value.
Update Group key
when any member-
ship terminates
If enabled, the Group key will be updated whenever any
member leaves the group or disassociates from the Access
Point.