LevelOne WAP-6012 - Page 71

Access Point Management
67
New Password
Enter the desired login password.
Repeat New Password
Re-enter the desired login password.
Admin Connections
Enable Wireless Web
Access
Enable this to allow wireless client access the device.
Enable HTTP
Enable this to allow admin connections via HTTP. If
enabled, you must provide a port number in the field
below. Either HTTP or HTTPS must be enabled.
HTTP Port Number
Enter the port number to be used for HTTP connections
to this device. The default value is 80.
Enable HTTPS
Enable this to allow admin connections via HTTPS
(secure HTTP). If enabled, you must provide a port
number in the field below. Either HTTP or HTTPS must
be enabled.
HTTPS Port Number
Enter the port number to be used for HTTPS connec-
tions to this device. The default value is 443.
Enable Management
via Telnet
If desired, you can enable this option. If enabled, you will
able to connect to this AP using a Telnet client. You will
have to provide the same login data (user name, pass-
word) as for a HTTP (Web) connection.