LevelOne WAP-6012 - Page 85

Appendix B - Troubleshooting
81
Properties for the TCP/IP protocol.
Problem 2:
My PC can't connect to the LAN via the Wireless Access Point.
Solution 2
Check the following:
 The SSID and WEP settings on the PC match the settings on the
Wireless Access Point.
 On the PC, the wireless mode is set to "Infrastructure"
 If using the Access Control feature, the PC's name and address
is in the Trusted Stations list.
 If using 802.1x mode, ensure the PC's 802.1x software is confi-
gured correctly. See Chapter 4 for details of setup for the
Windows XP 802.1x client. If using a different client, refer to the
vendor's documentation.