Appendix C - Windows TCP/IP
87
9. Ensure your TCP/IP settings are correct:
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the
default Windows setting. This is the default Windows settings. To work correctly, you
need a DHCP server on your LAN.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured for a fixed (specified) IP address, no changes are
required.
(The Administrator should configure the Wireless Access Point with a fixed IP address
from the same address range used on the PCs.)
To Next Page
Loading...
