User Guide
Leviton MLC 16D Motorized Lighting Controller Page 19 of 62
62
Refer to the “ASCII Formatting Guide” on page 36 for an explanation of the syntax
of the ASCII formatted files.
Formatting a Disk
This utility allows you to format a new disk as an MSDOS compatible disk.
Most disks sold are preformatted and will not require this operation.
To format a disk:
1
Press Edit.
2
Press F4, above Setup.
3
Press F4, above Disk.
4
Press F1, above Format.
A confirmation menu appears.
5
Press F3, above Yes, to format the disk,
or press F4, above No, to return to the Disk menu.
When formatting is complete, the console returns to the Disk menu.
6
Press Blackout or Edit to exit the Disk menu.
Deleting Files on a Disk
This utility allows you to clean up a disk, deleting individual files.
To delete files on a disk:
1
Press Edit.
2
Press F4, above Setup.
3
Press F4, above Disk.
4
Press F2, above Delete.
Once the file directory is loaded, the Disk Delete menu appears.
5
Turn Modify wheel 2 or 3 to move through the list of available files.
6
Turn Modify wheel 4 to select <Save> or <Cancel>.
7
Press F4, above Select <OK>, to delete the file,
or Press F4, above Select <Cancel>, to return to the Disk menu.
If you selected
<OK>
, a confirmation menu appears to confirm your
request.
8
Turn Modify wheel 4 to select <Save> or <Cancel>.
9
Press F4, above Select <OK>, to delete the file,
or Press F4, above Select <Cancel>, to return to the Disk menu.
10
Press Blackout or Edit to exit the Disk menu.