Leviton MLC16 - Scene Formats

User Guide
Page 42 of 62 Leviton MLC 16D Motorized Lighting Controller
62
Scene Formats
Following is an example of a Scene file in ASCII format. Assume that the Scanner
definition established in the DDL section has been assigned to Fixture buttons 1
and 2.
Scene 1
Traits All
fixture 1 ;Scanner
T: Pan,150
T: Tilt,30
T: Color,White
T: Gobo,Open
T: Dimmer,255
On
Off
Non, Noff, CC: followed
by a comma, followed by
a number 0-127,
followed by a comma,
followed by a value
0-127 or “Any.”
PC: followed by a
comma, followed by a
number 0-127.
Non, Noff, CC: followed
by a comma, followed by
a number 0-127,
followed by a comma,
followed by a value
0-127
PC: followed by a
comma, followed by a
number 0-127
Assigns a MIDI On command to a
MIDI event.
Assigns a MIDI Off command to a
MIDI event.
Keyword Valid Values Description
Scene 1-24 Establishes scene number to be programmed.
Fade 0-27:00.0 Determines the scene fade time.
Traits All, Select Determines whether all traits or only those
referenced are flagged for control.
Fixture 1-16 Establishes fixture number for which following
trait values are to be applied.
T: Trait label
followed by a
comma,
followed by a
valid numerical
value of label.
Assigns a trait value to a scene channel.
Keyword Valid Values Description