Lexmark 2591+ - Page 118

I-2 Service Manual
2580+, 2581+, 2590+, 2591+
Go Back
Previous
Next
Paper feed motor 4-19
Paper Select lever 4-20
Platen 4-21
Print unit 4-21
Printhead 4-24
Printhead cable 4-25
Ribbon drive rack gear 4-26
Right side sub frame 4-28
Rollers
Lower feed
4-33
Lower pinch 4-31
Upper feed 4-30
Sensor
Head gap and home position
4-34
Pull tractor and paper select 4-35
Top-of-form and paper present) 4-36
Sensors
Paper Present flag
4-34
S
Safety information ii-vii
Service checks 2-9
Abnormal noise 2-9
Abnormal print 2-12
Auto Sheet Feeder 2-9
Carrier 2-10
Intermittent problem 2-11
No print 2-12
Operator panel 2-13
Paper feed 2-13
Paper Present sensor 2-13
Paper Select sensor 2-15
POST 2-15
Power 2-16
Printhead 2-17
Pull Tractor sensor 2-18
Top-of-forms 2-18
Tractor 2 2-18
Settings
Tear off position
3-10
Top-of-form (continuous) 3-10
Top-of-form (cut forms) 3-10
Top-of-form (envelopes) 3-10
Setup Menu options 3-8
Setup mode 3-8
Entering 3-8
Exiting 3-8
Specifications 1-1
Symptom checks 2-4
Abnormal indications 2-4
Abnormal noise problems 2-4
ASF problems 2-4
Error indications 2-5
Operator panel problems 2-5
Paper feed problems 2-5
power problems 2-6
Print quality problems 2-6
T
tools required 1-2
V
Voltage, ground, and continuity 2-1