4-28 Service Manual
2580+, 2581+, 2590+, 2591+
5. Remove the paper feed motor bracket assembly, exposing the gears as shown.
Right side gears, sub frame removal
1. Remove the rear cover. See “Covers, rear removal” on page 4-5.
2. Remove the top cover. Go to “Covers, top removal” on page 4-5.
3. Unhook the wire retainer (A) from the carrier shaft.
4. Remove the two screws and washers (B) from the sub frame.
5. Remove the Paper Select lever (C).
To Next Page
Loading...
