1-6 Service Manual
4506-1xx
Tools
The removal and adjustment procedures require the following tools and equipment:
• Magnetic tip Phillips screwdrivers, large and small
• Volt-ohmmeter
Acronyms
ASIC Application Specific Integrated Circuit
CRC Cyclic Redundancy Check
DEV Developer Roll (of toner cartridge/photoconductor system)
DIMM Dual In-Line Memory Module
EEPROM Erasable Electrically Programmable Read-Only Memory
ENA External Network Adapter
FRU Field Replaceable Unit
HVPS High Voltage Power Supply
LED Light Emitting Diode
LVPS Low Voltage Power Supply (110 V or 220 Vac)
NVRAM Nonvolatile Random Access Memory
PC Photoconductor
PCL Printer Control Language
PCU PC/Cleaner Unit
POR Power-On Reset
POST Power-On Self Test
PPDS Personal Printer Data Stream
RIP Raster Image Processor
TAR Toner Add Roll
TU Toner
USB Universal Serial Bus
V ac Volts alternating current
V dc Volts direct current
To Next Page
Loading...
