Lexmark E120 - Additional Information-Secondary Light Patterns

2-14 Service Manual
4506-1xx
Additional information—secondary light patterns
• When the and lights are both on, a secondary error has occurred.
• When the and lights are both on, a paper jam secondary error has occurred.
• When the lights are both on, a toner cartridge error has occurred.
Press and release twice to display the secondary error code light pattern.
The following tables show what these light patterns mean and what to do.
Service error The printer has a service error,
and printing has stopped.
Turn the printer off and back on.
If the lights are still blinking, contact the next
level of support.
Press and release twice quickly to view the
secondary message. See “Service primary
code” on page 2-18.
Printer error The printer has one of the
following errors:
• Memory is full, insufficient to
save what is in the buffer, or
insufficient to defragment flash
memory.
• A page is too complex to print
or is shorter than the set page
margins.
• Resolution of a formatted
page is reduced to 300 dpi.
• A font error occurred.
• Communication with the host
computer is lost.
• Press twice quickly to see the secondary
error code. See “Additional information—
secondary light patterns” on page 2-14 for
more information.
•Press to clear the secondary message.
Secondary light patterns—additional information
Description/
Light pattern
Meaning Action
200 Paper jam at the input
sensor
Media has stopped over the input
sensor.
Open the front and rear covers and remove the
toner cartridge to access the area. Check for
obstructions and remove them.
201 Paper jams between the
input sensor and exit sensor
Paper has cleared the input
sensor but not made it to the exit
sensor.
Open the front and rear doors and check the
paper path for obstacles. The fuser should be
inspected.
Primary codes—additional information (continued)
Description/
Light pattern
Meaning Action
✷✷ ✷ ✷✷✷
zz
zz z
zzz