Lexmark E120 - Front Door Assembly Removal

4-8 Service Manual
4506-1xx
3. Pull the front of the cover to unlatch (B), pull the bottom out, and lift the cover to removeit.
Front door assembly removal
1. Remove the left cover. See “Left cover removal” on page 4-5.
2. Remove the right cover. See “Right cover removal” on page 4-7.
3. Grasp the right pivot and remove it from the pivot shaft (A).
4. Gently slide the front door toward the left side while lifting to the right side.
5. Once the left pivot is separated, lift the front door away from the printer.
B
A