2-12 Service Manual
4506-1xx
Waiting Printer is waiting until a print
timeout occurs, or until it
receives additional data.
• Press and release to print the contents of
the print buffer.
• Press and release to cancel the print job.
• Press and hold to reset the printer.
Flushing / Resolution reduced • Printer is flushing corrupted
print data.
• Printer is processing data or
printing pages, but the
resolution of a page in the
current print job is reduced
from 600 dots per inch (dpi) to
300 dpi to prevent a memory
full error.
• Wait until is on to print other jobs.
• Press and release to cancel print job.
• Press and hold to reset printer.
Not ready Printer is not ready to receive or
process data, or the printer ports
are offline.
• Press to return to the Ready or Busy
state.
• Press and release to cancel the print job.
• Press and hold to reset the printer.
Close door / Insert cartridge The printer door is open. • Close the door.
• Check the switches and cables under the left
cover.
Load media The printer is out of media, or the
media did not feed properly,
thereby not making it to the input
sensor in the allotted time.
• Load media into tray 1 and press to
resume printing.
• Check that the media is loaded correctly in
tray 1. (Do not overfill.)
•Press to cancel the print job.
Load manual feeder Printer prompts to load a single
sheet of media in the manual
feeder.
• Load media in the manual feeder with the
side to be printed facing up.
•Press to resume printing.
• Press and hold to reset the printer.
Print side two of duplex job Print the other side of a duplex
print job.
• Reinsert the print job in tray 1 using the
instructions in the driver pop-up menu to
orient the pages correctly (printed side up,
loading edge to front of the printer).
•Press to resume printing.
• Press and hold to reset the printer.
Primary codes—additional information (continued)
Description/
Light pattern
Meaning Action
zz
✷✷
z
z
zz
z ✷
✷ z
To Next Page
Loading...
