Lexmark Forms Printer 4227 Plus - Page 45

39
Chapter 3: Using the Operator Panel
Using the Operator Panel
Data Options Buffer Size
Controls the size of the printer’s
receive buffer.
Maximum, Minimum
Automatic LF
Automatically performs a line feed
(LF) when a carriage return (CR) is
sent.
On, Off
Automatic CR
Automatically performs a carriage
return (CR) when a line feed (LF) is
sent.
On, Off
Slashed Zero
Prints all zeros with a slash through
the center.
On, Off
Code Page Substitution
Substitutes code page 858 for code
page 850. Code page 858 contains
the

character.
Enable, Disable
Control Options Uni-Dir Print
Tells the printer to print uni-
directionally or bidirectionally.
On, Off
Auto Rdy Cut Sht
(Auto Ready Cut Sheet)
– When set to On, the printer
automatically sets the printer
online when a cut form is loaded.
– When set to Off, you must press
Start/Stop to set the printer online
after the cut form is loaded.
On, Off
Control Options
(continued)
Paper Out Alarm
Sounds an alarm when the printer is
out of paper.
Enable, Disable
Main Menu Primary Options Secondary Options