Change [Paper Source] to [Size] [Type] Paper
Try one or more of the following:
• Select the paper tray with the correct paper size or type.
• Press to continue printing after loading the correct paper size and paper type in the default paper tray.
• Press to cancel the current job.
Close Printer
The printer is open. Close the printer to clear the message.
Duplex Unit Missing
Try one or more of the following:
• Make sure the duplex unit is properly installed at the back of the printer to clear the message.
• Cancel the current job.
Ink Cartridge End of Life
Try one or more of the following:
• Replace the specified ink cartridge, and then press .
• Make sure the ink cartridge installed is supported by the printer.
Warning—Potential Damage: Continued use of the specified cartridge may damage the printhead.
Troubleshooting
138
To Next Page
Loading...
