4-38 Service Manual
7011-2xx
Transport motor cable removal
1. Remove the right cover. See “Right side cover removal” on page 4-7 for more information.
2. Unplug the transport motor cable (XPRT) at J19.
3. Remove the LVPS/HVPS card assembly. See “LVPS/HVPS card assembly removal” on page 4-28 for
more information.
4. Extract the cable through the side frame, leaving it free at the opening above the LVPS/HVPS.
5. Remove the fuser. See“Fuser removal” on page 4-21 for more information.
6. Extract the cable (A) through the side frame, leaving it free at the opening (B) above the LVPS/HVPS.
7. Unplug the cable at the motor, and install the new cable.
To Next Page
Loading...
