Lexmark X203N - Messages and Error Codes; Service Error Codes

Diagnostic information 2-9
7011-2xx
Messages and error codes
Service error codes
Service error codes are generally non-recoverable except in an intermittent condition when you can POR the
MFP to temporarily recover from the error condition.
Error Description Action
8XX Scanner service errors
840.01
Scanner
disabled
The scanner is disabled and can’t be used. Enter the configuration menu, and re-enable the
scanner module. See “840.xx service check”
on page 2-41
840.02
Scanner
auto
disabled
The scanner is disabled and can’t be used. This message is posted when the MFP PORs.
Enter the configuration menu, and re-enable the
scanner module. See “840.xx service check”
on page 2-41
841.00
Image Pipeline Image pipeline ASIC. See “Flatbed service
check” on page 2-24.
841.01
Service image processing unit: AFE register mismatch
841.02
841.03
Service image processing unit: SCNCHN DMA
841.04
Service image processing unit: new line too soon
interrupt
841.07
Service image processing unit: tonal data overrun
841.09
Service image processing unit: image processing too
slow
841.96
System time out: SIZAR out of band interrupt
841.97
Service image processing unit: output data uncollected
841.98
Service image processing unit: SCNCHN DMA underrun
841.99
Service image processing unit interrupt handler delayed
crash
842
Scanner Failure. Communication failure
843
Scanner Failure: carriage failed to home or move to
desired position
843.01
Scanner Failure ADF mechanical failure. Go to “ADF service
check” on page 2-23
843.02
Scanner Failure General mechanical failure. Go to “ADF service
check” on page 2-23
843.03
Scanner Failure Pick Roller engage failure. Go to “ADF service
check” on page 2-23
843.04
Scanner Failure Pick roller disengage failure. Go to “ADF service
check” on page 2-23