6
11. Fixed buttons
LDP-9208D does not support some buttons: Flash, Directory, and
Headset among the below buttons.
Flash button: Use to seize the new line without on-hook.
So you can make a call by dialing the desired number.
Speed button: Use to assign your speed dial numbers.
The button als
o deletes the last character of an input
in the menu mode s
uch as registering Station name.
Transfer/PGM button: Transfers the current active call
or to enter programming mode.
Directory button: Accesses
your private or public
directory for speed dialing.
DND (Do Not Disturb)/FWD button: Use to activate
DND so that your phone will not ring. Use to allow you
to forward all c
alls to another number by setting the call
forward type (1~4).
Call Back button: When the MWI LED indicates you
have a message, use to access y
our Voice Mailbox.
Mute button: Toggles audio from the microphone to the
connected party on and off.
Hold/Save button: Use to place a call on Hold. Also, use
to access a held call. In menu mode, it saves your inputs.
Ear Mic. Headset button: When using a Ear Mic.
headset, this button toggles
the Ear Mic. headset
state. When the Ear Mic. headset is active, the button
LED illuminates red. Or, press [PGM] +19 and then set
ON.
To Next Page
Loading...
Need help?
General
