33
4.3.3 Using System Speed Dial Numbers
You may, if allowed, use System Speed Dial to call frequently
dialed numbers.
In some cases, these numbers are divided into groups called
System Speed Zone Groups. In this case, you may access
some numbers and not others and your dialing restrictions
may be invoked.
To place a call using System Speed Dial by using Speed
button:
• Lift the handset,
• Press the SPEED button,
• Dial the desired System Speed Dial bin number.
Or,
SPEED button two times,
Press the Number or Use Volume Up/Down (or Navigation
Up/Down key) to select ‘S_SPD:3 (9208D), 3.DIAL BY SYS
SPD NAME (9224D/DF), 2.PUBLIC DIRECTORY (9240D)’,
Press the
Press the OK
button.
HOLD/SAVE
Select the desired System Speed Dial bin number,
Pres
s the Send Soft button, the OK button, or the
button.
To place a call using System Speed Dial by using
Directory button (for LDP-9224D/9224DF/9240D):
• Lift the handset,
• Press
the
DIRECTORY
button,
• Use Volume Up/Down (or Navigation Up/Down key) to select
‘3.DIAL BY SYS SPD NAME (9224D/DF), 2.PUBLIC
DIRECTORY (9240D)’,
•
•
HOLD/SAVE
Select the desired System Speed Dial bin number,
Press the Send Soft button, the OK button, or the
button.
4.3.4 Using and Entering Station Speed Dial Numbers
Each station in the system is allocated memory for Station
Speed Dial numbers each up to 25 digits. These numbers are
entered at the user’s station and may include several ‘special’
instructions. Special instructions and the corresponding
button are:
PAUSE will momentarily stop dialing.
To Next Page
Loading...
Need help?
General
